硅烷改性聚氨酯密封膠膠料的挺性
2025-05-26
推薦新聞
MS密封膠高壓膠管內膠硬度
2025-05-26
丁基防水嵌縫膠的力學性能
2025-05-26
新型高溫高壓丁基防水嵌縫膠膠筒
2025-05-25
新型高溫高壓硅烷改性聚氨酯密封膠配方設計...
2025-05-25
吸盤法模擬集中力荷載作用的丁基防水嵌縫膠現場檢測方法
- 發布時間 : 2025-2-19 17:04:59
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
吸盤法模擬集中力荷載作用的丁基防水嵌縫膠現場檢測方法
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2025-2-19 17:04:59
- Views:
Information
目前，對既有建筑玻璃幕墻進行安全評估時，對于丁基防水嵌縫膠大多采用現場切割部分樣品送實驗室檢測其邵氏硬度、延伸率等指標，根據實驗室檢測的結果結合現場對膠的厚度、寬度、外觀量等的檢驗結果，判斷丁基防水嵌縫膠的粘結面質量是否達到要求。上述方法大多需依賴實驗室的檢測結果，因此研究一套簡便、快速的丁基防水嵌縫膠現場檢測技術是十分必要的。
吸盤法模擬集中力荷載作用的現場檢測方法，是根據設計風荷載值，通過有限元計算分析得到等效的集中力荷載值，由初始切割測試得到初始撓度，根據被測處的膠體撓度是否超過初始撓度來判斷其粘結面質量是否合格。
整個集中力加載示意圖如圖1所示。
該設備在AS丁M C1394的基礎上，用夾具代替吸盤將加載鋁合金反力梁固定在玻璃板塊上，并且將真空橡膠吸盤改進為鋼圓盤，提高了現場的可操作1生，使設備的攜帶更為方便。
等效集中荷載的計算
采用有限元計算軟件ANSYS，對玻璃板塊在均布荷載、集中荷載作用下丁基防水嵌縫膠的應力和變形進行計算舉例如下。
分格尺寸為1 045mm x 690 mm,厚度為6 mm;彈性模量為71 700 MPa,泊松比為0.220丁基防水嵌縫膠寬度13mm，厚度13mm:計算時假定為雙折線型線性材料，即拉伸應力在0一0.21 MPa間，彈性模量為0.8M Pa，應力超過0.21 MPa時，彈性模量減小為0.3 M Pa;泊松比為0.30風荷載標準值取風荷載標準值嘆=5.OOkN/mzo計算結果如圖2、圖3所示。通過有限元計算，確定現場加載的等效集中荷載值，該集中荷載產生的丁基防水嵌縫膠應力與均布風荷載設計值作用下產生的應力應相同。http://hbxqtax.com/
Scan the QR code to read on your phone
+86-
13573398725
sdyuantai@163.com
搜索